1. PurposeIn order to strengthen the safety management of electrical operations during the construction of ships and offshore engineering (hereinafter collectively referred to as ships) and avoid acci...
(1) Oily ballast waterAfter the oil tanker has unloaded its oil, in order to ensure safe navigation and improve the efficiency of the propeller, a certain amount of water must be installed in the carg...
According to the requirements of the International Convention for the Prevention of Pollution from Ships, the necessary capacity of the slop tank of an oil tanker should not be less than 3% of the shi...
Article 1 These measures are based on the provisions of Article 14 Paragraph 3 of the Marine Pollution Prevention and Control Law (hereinafter referred to as this Law). Oil dispersant may...
PChapter One: General RulesArticle 1In order to improve the emergency response capability of ship pollution accidents, and control, reduce and eliminate marine environmental pollution damage caused by...
ollution removal operation planThis plan is applicable to Yantai Port and its offshore waters. The the maximum anti-velocity and the maximum anti-wind speed, etc., which conform to the sea conditions...
Safety Operation and Pollution Prevention Responsibility SystemChapter 1 General ProvisionsArticle 1 In order to strengthen the supervision and management of the company of the day.
China Securities Network News learned from the Ministry of Environmental Protection on April 19 that ten ministries including the Ministry of Environmental Protection and the National Development and ...
Follow us